Online Payments



  Home > Office Chair Parts > Gas Cylinders >

Rolland Office Chair Pneumatic Gas Lift Cylinder – Universal Size Fit All Chairs In USA/Canada



 
Alternative Views:


List Price: $49.98
Our Price: $49.98
Sale Price: $23.98
You save $26.00!

Availability:: Usually Ships in 24 Hours
Product Code: RLC120

Description Extended Information
 
This heavy duty Rolland(TM) brand gas lift cylinder is manufactured to the highest industry standard. Its' universal shaft size is compatible with all office chairs sold in the USA/Canada. Outer cylinder is 2" in diameter, and the inner cylinder is 1.1" in diameter. Diameter is measured at the center of cylinder, not at the edge. Both cylinders' edge are slightly tapered for ease of installation. Minimum length is 10.5" and extendable to a maximum length of 15.5". The adjustable range of 5" in between will cover the height needed for most users. Rolland gas cylinder is tested to the industry ANSI/BIFMA safety standard.

There are non-OEM gas cylinders in the market and almost all look the same externally. But they are not made to the same quality standard. We are confidence of our product quality and are offering an extended 90 days return period for this particular gas cylinder. If you simply not satisfied just return it within this period and we will even pay for the return shipping. This gas cylinder is also covered by 5 years replacement warranty. The return policy and warranty stated here only apply to this particular product. Model: RLC120


Features
  • Outer cylinder diameter: 2 inches, Inner cylinder diameter: 1.1 inches

    Minimum length: 10.5 inches

    Maximum length when fully extended: 15.5 inches

    Adjustable range: 5 inches

    Heavy duty weight rating: 350 lbs

    5 years manufacturer warranty


Average Customer Review: 5 of 5 Total Reviews: 6 Write a review.

  0 of 0 people found the following review helpful:
 
Great fix for our office chairs May 28, 2014
Reviewer: Tim "Grumpy Geek" from Medford, OR USA  
This isn't my first purchase of this item, and I'm sure it won't be the last. I work in an office with a lot of desk chairs, and many of them are getting old. Not to say they're ready to toss, but when the lifts failed, that's what they used to do. This little thing does the trick: fix the chair and keep it out of the landfill, and keep the boss happy with the low cost and reliability.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Fits Perfect, Easy to Replace! April 23, 2014
Reviewer: R. Duncan from SC USA  
This was super easy to install. Used the hammer and pipe wrench method to remove the old one. The Rolland cylinder fits perfectly and seems more solid than the original. Would highly recommend this to fix the sinking chair syndrome prone to strike inexpensive chairs from office supply chains.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
No more po-go chair! April 18, 2014
Reviewer: Christine Christopher from Thonotosassa, Florida United States  
I am so happy with this purchase. It arrived in two days, it fit (much to my surprise as I wasn't sure what I had as far as dimensions) and my chair now stays UP !!!!!! I wish there was some instructions but I found a lot of sites with the instructions on how to remove the cylinder (watch your toes). All in all I am very happy with this purchase. PS the price was right too.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
Great Replacement March 13, 2014
Reviewer: jtoth  
The gas cylinder in my office chair started leaking about a year ago. I have been fed up with it since then but I wasn't sure how 'universal' a replacement would be so I put off buying it. I finally gave in a purchased this item, and I am glad I did! Replacing the cylinder was easy (assuming you have a rubber mallet and a pipe wrench, and maybe some WD-40). Just use the mallet to knock the base of the chair (with the wheels) off of the bottom of the old cylinder, and then lock the pipe wrench onto the silver part of the cylinder and turn it clockwise and counterclockwise (rock back and forth) until it breaks free. Then slide in this new replacement and put the chair base back on. Easy, and fixed! Now my chair doesn't leak! This is a high quality item.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Life Has It's Ups & Downs February 19, 2014
Reviewer: JetanMaster  
After a number of years my favorite office chair would not maintain its seat level due to the original gas cylinder no longer being able to function consistently. It was quite frustrating working at my desk and then suddenly have that sinking feeling. The Roland replacement came to the rescue. The "hard part" was taking out the chair's original cylinder (which required a few hammer blows to loosen) but after that the Roland replacement installed quickly and easily. So far I have experienced absolutely no issues with it retaining whatever height I set it to, and it even has a greater height range than the original cylinder had. Very satisfied, but the real test is how long will it last? The original lasted about 3-4 years, so I'll have to wait and see...

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Office Chair Parts > Gas Cylinders
Office Chair Parts